AP48 : 2.4/5GHz High Power Access Point PCBA
Part No.:JWAP601

Features
![]() |
![]() |
![]() |
- Wide coverage Access Point for wireless clients.
- High power RF output for high availability links.
- Long range links for wired-LAN replacement.
- High throughput for high utilization network links.
- Multiple modes (AP, Multi-Bridge, AP Client, CPE Router, Bridge and Repeater) for flexible design of layer-2 and layer-3 wireless networks.
- Multiple security protocols (WEP, WPA, WPA2, TKIP and AES) for WISP applications.
Specifications
| Processor | 180 MHz MIPS 4Kc |
| Flash | 8 MByte |
| Memory | 32 MByte, 16-bit SDRAM |
| WLAN | IEEE 802.11a/b/g |
| LAN | 10/100 Ethernet, auto MDI-X, full/half duplex |
| Monitor | Hardware Watchdog |
| Security | WEP, WPA, WPA2 |
| Kernel | Linux 2.6.21 |
| Driver | Atheros Madwifi |
| Support Band | IEEE 802.11a/b/g |
| IP Assignment | DHCP/ Static IP |
| Security | HW encryption engine supports WEP, TKIP and AES-CCMP |
| Operation mode | AP, Multi-Bridge, AP Client, CPE Router, Bridge and Repeater |
| Configuration | Web Interface |
| Antenna | Primary or Secondary selectable |
| Bandwidth control | Upstream/ downstream bandwidth setup |
| Maintenance | Web browser firmware upgrade; profile backup/restore; SNMP |
| Modulation | BPSK, QPSK, CCK, and OFDM |
| Frequency Range | IEEE802.11a: 5180~5250MHz (Japan) 5180~5350MHz /5470~5725 MHz (EU) 5180~5350MHz /5725~5825MHz (USA) IEEE802.11b/g: 2412~2484 MHz |
| Output Power | IEEE802.11a: 22±1.5dBm @ 6Mbps 18±1.5dBm @ 54Mbps IEEE802.11g: 25±1.5dBm @ 6Mbps 22±1.5dBm @ 54Mbps IEEE802.11b: 25±1.5dBm @ 1Mbps 25±1.5dBm @ 11Mbps |
| Receiver Sensitivity | IEEE 802.11a/g 54Mbps (64QAM):-66dBm 48Mbps (64QAM):-71dBm 36Mbps (16QAM):-78dBm 24Mbps (16QAM):-80dBm 18Mbps (QPSK):-81dBm 12Mbps (QPSK):-82dBm 9Mbps (BPSK):-85dBm 6Mbps (BPSK):-87dBm IEEE 802.11b 11Mbps (CCK) : -82dBm 5.5Mbps (CCK): -86dBm 1,2Mbps (BPSK,QPSK): -90dBm |
| DC Power | Standard power: Power adaptor 12V@1A / Passive PoE with injector PD mode: Mode B (pairs 4/5 and 7/8) Polarity: Polarity insensitive |
| Environmental Specification | Operation temperature: -30 to +80°C Humidity: 95% @ +55°C Lightning protection: DC ground |
AP48 Datasheet: Download



